| Revision |
Date |
Description |
| 30 |
apr. 30, 2025 |
- Added support for exporting only connected microcracks with grid
- Added option to render only FRACMAN DFN with connected pipes
|
| 29 |
mars 28, 2025 |
- Added auto create initial cracks on clusters feature
- Fixed mpi crash if running thermal without fluidjoints
- Fixed crash during initialization of mpi
- Added option to reduce matrix stiffness from the start simulation and batch
- Minor bugs fixed in batch
- Improved volume calculation when approximate pressure gradient is selected
- Fixed small bug in start simulation dialog and in bore hole segment dialog
|
| 28 |
mars 12, 2025 |
- The reference stress correction included in the wellbore pressure initialization.
- Fixed issue with well segment not being translated and rotated properly
- Matched the sign convention with dfn translation when trasnlating well segments
- Fixed issue with pressure initialization when not being checked on ui but still causing it to change the initial fracture pressure
- Fixed cluster nodes plot item not considering reference stress for some nodes
- Added reset casing/cement temperature to batch and reset lattice
- Updated cellspace to avoid crash with large models
|
| 27 |
jan. 24, 2025 |
- The advection time step calculation after resetting the multiplication factor is now done based on fluid elements, not pipes
- Added calculation of the contribution of the convective heat transport to the advection critical time step
- The calculation is done within pore pressure change loop and in the separate function called when the advection time step factor is changed from GUI
- Thermal multistepping now starts multistepping right away as opposed to a few non multi steps first
- Fixed crash related to stimulated area and fracture area histories
|
| 26 |
jan. 20, 2025 |
- If resolution ratio between global resolution and smallest resolution is greater than 20, the ajusted ratio will now have a more gradual increase
- Fixed bug in calculation of inflow and outflow rates for fluid elements
- Fixed sink histories, variables are now always accumulated regardless of history interval
- Fixed crash on mpi when model does not have fluid nodes
- Fixed reset temperature not working for console version
- Fixed shear and normal stiffness being reversed for fracman
|
| 25 |
jan. 8, 2025 |
- Proppant volumes instead of concentrations are used during proppant transport calculation. Old volumes are reset in the function that updates proppant concentration due to volume change (and does propopant stress calculation)
- Fixed sink histories only showing 0
- Fixed the bug causing instability in propped fractures
- Old volumes of fluid elements are reset outside calculateProppantStress function. The change preserves correct old volume for the simplified fluid calculations
- Fixed save/restore for sink histories and proper reset of their values per cycle
- Added history interval to save/restore
- During excavation cleanup, fluid nodes and pipes are resequenced into sequential order to avoid issues for mpi
|
| 24 |
dec. 19, 2024 |
- Added factor of 0.7 to implicit aperture calculation
- Error calculation for implcit logic now uses relative error instead
- Excavated nodes properly restored for mpi
- Tension events are assumed to be finished when restoring model in mpi
|
| 23 |
nov. 13, 2024 |
- Fixed thermal calculations
- Added implicit convergence factor to save/restore
- Added seq number to pipe plot item
- reset segment temperature save/restore now works
- fixed bug leading to stretched pipes appearing after save/restore following the excavation of pre-existing fluidjoints
|
| 22 |
aug. 29, 2024 |
- Added option to generate Slurm script instead of SGE
- Forces are not initialized in the joint springs for the Voronoi lattice. Forces in those springs should be generated during mechanical equilibration. The force initialization previously used resulted in relatively large force fluctuation and tensile forces, even for all compressive stress states. The force/displacement function is simplified. The check for spring state is done in one place, at the end of the function. The tensile strength and cohesion factors are refined.
|
| 21 |
aug. 2, 2024 |
- Added set maximum proppant stress to reset lattice
- Restored proppant concentration changes
- Restore get permeability changes
|
| 20 |
apr. 30, 2025 |
- Fixed signal for segment temperature
- Microcracks exporter now checks if data is within the model extent
- Added matrix time step to simulation time
- Fixed multithreading bug on permeable dfn
- Added fraction of pressure increase to reset lattice
|
| 19 |
maj 15, 2024 |
- Updated user's guide
- Fixed importing fracman
- Added limit range to save/restore
- Fixed history locations for fluidjoints
- Fixed joints getting deleted if global coordinates were used with a rotation
|
| 18 |
apr. 24, 2024 |
- Fixed reset temperature to properly use springs instead of nodes
- Fixed display histories when no cluster exists
- Added exact location of history tp the output of batch and console
- Fixed pressure initialization of matrix pressure
- Fixed limit range of of fracman dfn import, now limits springs on initialization rather than when importing
- Added reset temperature to batch, save restore needs to be fixed
|
| 17 |
mars 22, 2024 |
- Fixed crash when importing joints using dxf files
- Removed broken example problems and fixed some
- Fixed bug on sub-lattice zone initiation of joints
- Added limit import range to import fracman DFN dialog
- Fixed bug on sketch model when plotting boreholes with reference point and azimuth rotation
- Added reset temperature to reset lattice, allowing temperature of segments to be set to fixed or to loose
|
| 16 |
mars 5, 2024 |
- Added heal microcracks to batch
- Updated Enable Multistep to Enable Multistepping During Advection Simulation
- Fixed crash on running mechanical with fluid inactive
- Fixed calibration mode not cracking properly
|
| 15 |
feb. 21, 2024 |
- Fixed micro cracks counter when exporting micro cracks
- Added check box to batch and reset lattice to import only connected micro cracks when importing initial state
- Added heal microcracks to reset lattice for removing cracks that don't have pipes connected
|
| 14 |
feb. 15, 2024 |
- Fixed initial state not importing proppant concentration
|
| 13 |
feb. 2, 2024 |
- Fixed prevent micro cracking check box not being saved on restore
- Added micro crack counter to micro crack export when using a grid
- Fixed batch depletion workflow dialog box
|
| 12 |
jan. 19, 2024 |
- Added fast pore pressure import method for rectangular and uniform grids
- Fixed crash on proppant concentration plot item and importing from fluid nodes file
|
| 11 |
dec. 12, 2023 |
- Fixed license dialog version
- Updated thermal example in example files
- When exporting microcracks with a grid, empty Joint List will show as N/A
- Fixed bug when checking for joint intersection resulting in an undefined joint intersection angle
- Fixed bug not allowing initial state to be loaded
- Updated reset lattice dialog
- Fixed import bug for MC files
- Fixed permeability bug for importing multiple fracman dfns
|
| 10 |
nov. 28, 2023 |
- Minor GUI changes
- Excavate now deletes fluid nodes, pipes and fluid joint from liner
|
| 09 |
nov. 16, 2023 |
- Added maximum number of mech interactions to reset lattice and batch dialog
- Removed option to run 10000 mechanical steps if relative volume balance is greater than 10%
- Fixed pump schedule import dialog
|
| 08 |
nov. 6, 2023 |
- Fixed cluster fluid node activation
- Update thermal options text on solutions tab
- Fluid cycle during thermal equilibrium runs with allow aperture change only on first cycle
|
| 7 |
okt. 4, 2023 |
- Pipes are impermeable if both fluid elements are impermeable. Pore pressure changes are calculated for impermeable fluid elements.
- Fixed cluster issue not getting activated properly
- Update for intel oneAPI 2023
- Missing labels in hfconfig.xml
- Removed libfabric from linuxdeploy.bat
|
| 6 |
sep. 12, 2023 |
- Building w/ CMake
- Using Github for subversion control
- Fixed issue with wrong fluidnodes being calculated in implicit logic
- Only fluid elements inside the perf tunnel or completion wil be skipped on the implicit calculations
- Fixed bitmap exporter
- Fixed dialogs for borehole import and wellgeometry import
|
| 5 |
juli 31, 2023 |
- Fixed display of demo mode watermark.
- Enhanced console license security.
|
| 4 |
juli 20, 2023 |
- Fixed UI bugs causing crashing.
- Added heat advection multistepping.
|
| 3 |
juli 11, 2023 |
- Added variable to store matrix pressure.
- Added security to console version.
|
| 2 |
juni 13, 2023 |
- Bug fix: Fixed Bitmap export crash.
|
| 1 |
juni 12, 2023 |
- Updated from XSite 3.0.69.
- Bug fix: the Matrix checkbox in the Features/Fluid tab will be unchecked after reloading a file following fluid injection.
- Bug fixed: code was crashing during post-processing execution when exporting MC using grid file.
- Bug fix: code was crashing when recreating fluid nodes when adaptive resolution was being applied to the model.
- Bug fix: code was crashing stop simulation before it finishes and click on Reset Model. Reset the batch and when you execute it again.
- Added checkbox on Features/Sink tab that will allow to activate the sink when the defined pressure is reached.
|
